YLCNC 211PC022S0004 2 PIN Auto Connector Sealed Auto Wire Harness Plug

The YLCNC-0456 2-pin PBT sealed auto wire harness plug is a sealed equivalent of OE NO. 211PC022S0004 on automotive vehicles, with a water-resistant seal and the original mating layout. If your existing plug is cracked or the terminals are green, this 2-pin replacement restores contact resistance to spec.

If you need samples, you can place an order through our online store link: www.ylcnc-auto.com

Specifications

Company Strengths

• 18 Years Production Experience

• 11,000 ㎡ Production Base

• 270+ Employees

• 15,000+ Product Types

• IATF16949 Certified

• Professional R&D & Mold Team

• Customized Wire Harness & Domestic Replacement

• Stable Quality & On-Time Delivery

Product Advantages

1. Sealed two-way miniature plug: The compact black PBT 2-pin body seals small sensor and pump circuits against damp on general automotive looms.

2. OE 211PC022S0004 swap: Cavity spacing matches the factory 211PC022S0004 plug, so aged two-way joints swap out without re-crimping.

3. Per-cavity waterproof boots: Each of the two positions slips on a silicone boot, keeping washer and coolant-pump joints dry under the wing.

4. Latch-in retention ramp: The socket ramps guide the plug in and a latch retains it, preventing terminal pull-out from engine vibration.

5. Custom-cut wire pigtails: Pigtails are terminated to your gauge, length and color, suiting both OE repair and accessory installation.

6. Over-the-counter repair packs: Housings, terminals and seals bag together on shop counters, so garages grab a sealed 2-pin repair in one pick.

Main Application Scenarios

1. Small engine sensor circuits on petrol and diesel cars sealed by a compact 2-pin plug.

2. Washer bottle and coolant-pump leads joined near the inner wing by the OE 211PC022S0004 plug.

3. Repair technicians cutting out water-damaged two-pin connectors and crimping in sealed replacements.

4. Accessory fitters adding spotlights and horns through a weatherproof 2-way inline joint.

5. Aftermarket harness builders trimming lead lengths to spec on a dependable two-pin sealed block.

Service Advantages

1. Customized Services: Samples of a customized 2-pin variant are shipped for your bench test before we open the order. The secondary lock is engraved into our own mould, consistent across every domestic replacement batch.

2. Standard Services: Batch quantities are planned to your rolling forecast, reducing safety stock that automotive importers must otherwise hold. Fast restocks let automotive shops run leaner, since the next 2-pin batch arrives before they run out.

3. Value-added Services: Professional technical support is provided. Any seal or lock issue on the sealed auto wire harness plug is logged and corrected, with the fix applied to later 2-pin batches.

Video

Inspection Equipments

FAQ

Q1: Generic sealed two-pin repairs use which OE number that YLCNC-0456 substitutes?

A1: Yes. YLCNC-0456 is a cross-reference replacement for OE NO. 211PC022S0004, matching the sealed 2-pin layout, black PBT shell and waterproof cavity boots for general automotive replacement.

Q2: Do you match the original automotive harness wire colors?

A2: We avoid over-stuffing the sealed auto wire harness plug, so each gauge sits in its rated cavity and the seal closes fully.

Q3: Which half is the in-line join for a automotive two-section harness?

A3: You may receive male and female units in equal ratio, or split to the mix your workshop uses.

Q4: Can you provide sample parts before a formal contract?

A4: Each operator on the 2-pin line is trained on seal insertion, since that is the critical step.

Q5: Do you split payment between sample and bulk?

A5: We split the sample charge from bulk invoicing, so a trial order stays small and manageable.

Q6: Over-the-counter garages — is YLCNC-0456 kept on standing stock?

A6: Two-way sealed plugs sit in routine buffer stock, so counter shops restock the 211PC022S0004 replacement without a production wait.