YLCNC 6181-0073 4 PIN Oxygen Sensor Connector Weatherproof Auto Harness Connector

The YLCNC-0755 is a 4-pin sealed PBT wire-to-wire weatherproof auto harness connector that cross-references OE NO. 6181-0073, so a worn toyota, toyota camry harness can be repaired by swapping this plug alone. Packed as a male or female half per your selection, the 4-pin set arrives ready to crimp and fit.

If you need samples, you can place an order through our online store link: www.ylcnc-auto.com

Specifications

Company Strengths

• 18 Years Production Experience

• 11,000 ㎡ Production Base

• 270+ Employees

• 15,000+ Product Types

• IATF16949 Certified

• Professional R&D & Mold Team

• Customized Wire Harness & Domestic Replacement

• Stable Quality & On-Time Delivery

Product Advantages

1. Toyota weatherproof block: The sealed black 4-pin housing protects Camry sensor circuits from rain, salt and road spray.

2. OE 6181-0073 direct fit: Its layout copies the Toyota 6181-0073 connector, dropping onto original terminals without modification.

3. Four-cavity sealed entry: Wire seals at every port stop water wicking along the cable into the contact zone.

4. Camry-underhood durability: PBT resists coolant vapour and heat soak near the Camry engine bay across service years.

5. One-click secondary lock: The latch snaps fully home, holding the pair together over bumpy Toyota road surfaces.

6. Japanese-car program stock: Aftermarket suppliers stocking Toyota cross-references keep the 4-pin block on active reorder cycles.

Main Application Scenarios

1. Toyota Camry engine sensor wiring, where a weatherproof 4-pin joint survives water-ingress fault claims.

2. Japanese-car repair bays replacing corroded 6181-0073 connectors before misfire codes set.

3. Aftermarket Toyota catalogs listing the 4-way block against oxygen-sensor and injector harness faults.

4. Taxi fleet maintenance schedules on Camry units, where sealed connectors are swapped before wash-down reaches contacts.

5. Retrofit Toyota installers tapping four circuits through one waterproof junction for added electronics.

Service Advantages

1. Customized Services: Your reference drawing is annotated back to you, confirming how the 4-pin seal and lock will be built. We refurbish worn mould inserts on the bench, extending the life of the 4-pin cavity at low cost.

2. Standard Services: Each release of the 4-pin part follows the same work order, so tolerance drift across lots stays minimal. Stock turns quickly on the 4-pin line, which means fresher seals and terminals in every carton.

3. Value-added Services: Professional technical support is provided. Drawings and 3D views of the sealed 4-pin connector are shared on request to ease your catalogue listing.

Video

Inspection Equipments

FAQ

Q1: Which Toyota Camry OE number does the YLCNC-0755 connector replace directly?

A1: Yes. YLCNC-0755 is a cross-reference replacement for OE NO. 6181-0073, retaining the original 4-pin layout, black weatherproof PBT body and sealed cavities for Toyota and Camry circuits.

Q2: YLCNC-0755 stripe color customization carries what minimum on a Toyota Camry run?

A2: Custom stripe colors run with no minimum beyond the trial quantity, even on a short weatherproof auto harness connector run.

Q3: Which half should distributors keep as spares for toyota, toyota camry garages?

A3: We can bias a carton toward the faster-moving gender for your toyota, toyota camry repair channel.

Q4: YLCNC-0755 black housing quality traces back to which resin control point?

A4: The PBT resin is sourced from qualified suppliers, and every bag is lot-recorded for the black housings.

Q5: 6181-0073 weatherproof connector pricing covers which packing standard by default?

A5: Standard export carton packing sits inside the unit price, and any special Toyota-program labelling is quoted separately.

Q6: Is YLCNC-0755 output consistent enough for a standing Toyota aftermarket line?

A6: Monthly bulk lots run from matched tooling, so Camry program buyers receive unchanged housings across repeat releases.